Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Overview
Introduction
The ESP32-S3-Touch-LCD-1.28 (hereinafter referred to as "the development board") is a low-cost, high-performance microcontroller development board
designed by Waveshare. It features a 1.28-inch capacitive touch LCD screen, a lithium battery charging chip, a six-axis sensor (three-axis accelerometer
and three-axis gyroscope), and other peripherals. The board is based on the ESP32-S3R2, which is a system-on-chip (SoC) integrated with low-power Wi-Fi
and BLE 5.0. It also includes an external 16MB Flash and 2MB PSRAM. The SoC features hardware encryption accelerators, RNG, HMAC, and digital
signature modules, meeting the security requirements of the Internet of Things (IoT). Its various low-power operating modes are suitable for power
requirements in IoT, mobile devices, wearable electronics, smart home applications, and other scenarios.
Parameters
LCD Parameters
Touch Chip---CST816S
Display Chip---GC9A01A
Resolution---240(H)RGB x 240(V)
Display Panel---IPS
Touch Interface---I2C
Display Interface---SPI
Display Size---Φ32.4mm
Pixel Size---0.135(H)x0.135(V)mm
IMU Parameters
Sensor---QMI8658
Accelaeration Parameters
Resolution: 16-bit
Range (Optional): ±2, ±4, ±8, ±16g
Gyrometer
Resolution: 16-bit
Range (Optional): ±16, ±32, ±64, ±128, ±256, ±512, ±1024, ±2048°/sec
Development Resources
https://www.waveshare.com/wiki/ESP32-S3-Touch-LCD-1.28?Amazon
Package Content
ESP32-S3-Touch-LCD-1.28 x1
SH1.0 12PIN cable x1
Screwdriver x1