Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

Waveshare ESP32-S3 Development Board, 32-Bit LX7 Dual-Core Processor, Integrates GC9A01 Display Driver Chip, with 1.28inch IPS Round LCD, 240×240 Resolution, Supports WiFi

Kostenloser Versand ab 25.99€

24.99€

11 .99 11.99€

Auf Lager

Info zu diesem Artikel

  • Equipped with Xtensa庐 32-bit LX7 dual-core processor, up to 240MHz main frequency. Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and BT5 (BLE), with onboard antenna. Type-C connector, keeps it up to date, easier to use
  • Onboard 1.28inch LCD display, round IPS panel, 240x240 resolution, 65K color. Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture. Onboard 3.7V lithium battery recharge/discharge header and GPIO headers
  • Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
  • Integrated with USB serial port full-speed controller, GPIO pins allow flexibly configuring pin functions


ESP32-S3-LCD-1.28 is a low-cost, high-performance MCU board designed by Waveshare, tiny size, with onboard 1.28inch LCD display, Li-ion battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), and so on, which makes it easy for you to develop and integrate it into products quickly.


Giu
Bewertet in Italien am 8. Mai 2024
Die Medien konnten nicht geladen werden.
Charly
Bewertet in Deutschland am 5. Mai 2024
Wow. Das kann schon was. Die aufgespielten Demos geben einen guten Vorgeschmack, was mit der grafischen Entwicklungsumgebung LVGL so möglich ist.Das macht wirklich was her. Wo man die hier entwickelten Funktionen dann später einsetzen kann, ist mir bisher aber noch nicht klargeworden.Welches Modul, welche Platine dann das "eigentliche" Basismodul für den Echteinsatz wäre, habe ich allerdings noch nicht gefunden. Hinweise nehme ich gerne entgegen.
Enrique
Bewertet in Spanien am 18. Dezember 2024
No lo he usado aún pero tiene buena pinta. He tenido problemas para encontrarlo en la web de Waveshare, tanto el producto como el manual. Quizá está descatalogado no sé.Para los interesados, este es el manual https://www.waveshare.com/wiki/ESP32-S3-LCD-1.28
Nicolas Maumy
Bewertet in Frankreich am 18. Mai 2024
Petite carte esp32 plutôt performante avec module wifi 802.11n et BT 5.0. Il y également un gyroscope et un LCD IPS de 1.28" intégré (pas de tactile ! On peut également connecter une batterie lithium, il y a un bms intégré.Le pilotage de l'écran n'est pas simple pour un débutant pour moi, mais cela n'enlève rien au qualité de la carte, je suis juste pas très bon :-)Néanmoins j'ai des idées de projet futur pour ce petit module qui est plutôt sympa :-)PS : Il y a un programme déjà dessus affichant les possibilités de ce module lorsque qu'on l'on le branche pour la 1er fois.Bon produit !
Frank A
Bewertet in den USA am15. August 2024
The one thing to note is that this is NOT the touch screen model, and therefore is more for a smart display project, and not for something more interactive without some form of external input (after getting this I immediately ordered the touch screen version to play with https://a.co/d/3DPWkbd ).Anyhow, this development board has a reasonably powerful processor for such a tiny package, and should be able to handle most compute/display tasks needed to make full use of the display. It had a full set of headers to attach "things" depending on your use case. Be aware the the header pitch is LESS that 2mm, while not surprising for this package it does require the use of the correct connectors to use the breakout. The LCD display is crisp and vibrant, and is easy to read in almost every lighting condition. If you are looking for something like this that does not need touch sensitivity you shouid be very happy with this for your project. Highly Recommended
GuiguiTechTips
Bewertet in Frankreich am 12. Juni 2024
Ces modules ESP32 / écran IPS ronds sont de plus en plus nombreux, ils servent à la base de dev kit pour des montres.Sur la qualité du module rien à redire, c'est propre et l'écran et de bonne qualité.C'est un ESP32 que l'on retrouve dessus donc ce n'est pas très compliqué à programmer.Par contre on ne va pas se mentir, même si l'ESP32 à de la patate il est à des années lumières en terme de performance et d'efficacité énergétique des composants des grandes montres connectées comme une Apple Watch 🤣Après avoir à réfléchi à quoi faire de ce genre de module je me suis finalement dit qu'un module rond et tactile faisait en fait tout simplement ... un très bon bouton / afficheur pour n'importe quel projet (par exemple pour régler le volume audio de quelque chose, de thermostat, ...etc).
Produktempfehlungen

11.99€

6 .99 6.99€

4.4
Option wählen

53.96€

28 .99 28.99€

5.0
Option wählen