Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Gehrungsanschlag für Tischkreissägen für die Holzbearbeitung mit 19-35 Zoll (ca. 48 - 89 cm) Raster
Unser Gehrungsanschlag passt in die meisten Standardschlitze von Tischkreissägen mit den Abmessungen 3/4 x 3/8 Zoll (19 x 9,5 mm). Er verfügt über eine abnehmbare Scheibe und ist sowohl mit T-förmigen als auch mit U-förmigen Schlitzen von 3/4 x 3/8 Zoll kompatibel. Ausgestattet mit 15 positiven Anschlaglöchern ist er das ideale Upgrade für die präzise Holzbearbeitung.
Spezifikationen
Artikelmodellnummer: TN-1122D
Hauptmaterial: Aluminiumlegierung
Einstellwinkelbereich: ±70°
Winkelgenauigkeit: ±0,5°
Winkelbefestigungsmethode: 15 positive Anschläge
Anzahl der Winkeleinstellungen: 15°, 22,5°, 30°, 35°, 45°, 60°, 67,5°, 90°, -67,5°, -60°, -45°, -35°, -30°, -22,5°, -15°
Skala: Lasermarkiert, metrisch und imperial
Verwendbarer T-Nut: 0,75 x 0,375 Zoll / 19 x 10 mm
Produktabmessungen: 20,5 x 21,7 x 4,7 Zoll / 520 x 550 x 120 mm
Nettogewicht: 4,8 lbs / 2,19 kg
Paket Inhalt
1 x Gehrungsanschlag (Metall-Einstellplatte und Gleitschiene, vormontiert)
1 x 19-35 Zoll Gitter
1 x Gitterbegrenzer
1 x Griff
1 x Inbusschlüssel (4 mm)
1 x Inbusschlüssel (2 mm)
Gerard K.
Bewertet in den USA am9. Februar 2025
Very nice heavy
Patrick D. Jennings
Bewertet in den USA am20. Januar 2025
nice precision tool
Jeff W
Bewertet in den USA am5. September 2024
The square, guageing and alignment holes were all usable out of the box. The miter moved in the table saw slot easily without wiggle. I wish the slot bar was longer.The adjustable extension fit well and is helpful. However the handled clamping screw used to set the extension in place was located in a place forcing you to only use it in the left saw guide location. I could not figure a way to use this miter on the right saw guide.Overall a good value for the money.
James B.
Bewertet in den USA am17. August 2024
In my search for a quality miter gauge at a reasonable price, found this little gem. When I ordered it thought I would have to make some changes. Other reviews indicated it had some problems with Accuracy and why.Upon receipt, found all problems previously addressed had been fixed by the manufacturer. Assembled the unit and used right out of the box with superior performance. In addition it looks good and is well made. Scales read from left to right and are easy to read, like the stop. Good product at a reasonable price.
brian
Bewertet in den USA am1. November 2024
I'm not an expert but for the price with a tiny bit of tinkering it will be worth it but there is good and badGood:PriceLength and adjustableFast shippingHas trackbar adjusters and x1 rollerHas a stopper for repeddative cuts.Cosmetically nice to look at.Bad:Trackbar adjusters are spread out kinda farAnd only x1 roller in front so back of bar is able to lift upBar is rather long think to long for a job site tablesaw.Miter angle actually recesses to far down and snags my table needs washers going to see if u have some nylon washers laying around to adjust it. Think I might try to cut the bar down and add a roller on the back. Might want to wax the bottom of it cause it does have drag as well all of them do would help.Overall with a little mcgyvering think it will work nicely for th price. If washer doesn't help will prob drop it a star 🤷😵💫
Produktempfehlungen
