Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktinformation
Über Qwork
Mehr sparen, mehr bekommen
Keine Werbung, nur niedrige Preise und gute Produkte. Wir halten es einfach und stellen sicher, dass Sie das Beste für weniger bekommen. Wählen Sie Qwork, wo Ihr Geld härter für Sie arbeitet.
philippe maton
Bewertet in Frankreich am 3. Februar 2025
précision et robustesse
Jerzy Horyd
Überprüft in Polen am 24. Februar 2025
Całkiem przyzwoicie wykonany stolik. Wymagał drobnych modyfikacji (skrócenie rączek pokręteł oraz zastosowanie śrub z łbem okrągłym w systemie mocowania przedmiotu aby mogły obracać się w rowku stolika) i regulacji luzu. Ogólnie - polecam.
Leonardo Chittaro
Bewertet in Italien am 4. Dezember 2024
il tavolo da lavoro va bene per i lavori di bricolas
A Hall
Bewertet in Großbritannien am 28. Oktober 2024
I wanted to use this for plastic aircraft modelling, super-detailing structures from plastic and brass etc. (if you're a modeller you know the sort of thing) in combination with a small drill press so nothing with .001% precision. The table is way better than I thought though appreciably built to a price. The green painted bits are die cast Myzak or something, with aluminium extrusions for the table.The unit comes pre-assembled other than the handle for the vernier wheels, verniers themselves are printed labels and the handles...yeah, could be better. If you're a proper machinist you'll undoubtedly own tables in the hundreds of quids worth but overall for duffers like me however, this is ideal for light milling or particularly in my case, the ability to drill holes in a straight line.One of the M8 threads in the clamping plate hadn't been cut fully, no issue as I had a tap on hand.
Daniel G.
Bewertet in Deutschland am 24. Oktober 2024
Für den Preis echt super verarbeitet und für mein Einsatzgebiet ideal. Die Verschiebung beim drehen ist sehr langsam, kann man als Vorteil oder Nachteil sehen abhängig vom Einsatzgebiet.
Roboprof
Bewertet in Großbritannien am 13. Dezember 2024
Ordered Wednesday arrived Friday. It was lighter and smaller than I was expecting but the measurements were correct. It is all aluminium. The base plate is rather small so I had a bit of difficulty lining up the 4 slots which are in a rectangular pattern with the 6 slots on my bench drill which are spaced radially at 60 degree angles. Thus its was not possible to fit the centre of the cross slide travel directly under the centre of the chuck. The thread in one of the clamping plates had not been fully made but I soon cured that with an 8 mm tap. The nuts were 14 mm which is not standard so I discarded those and fitted 13 mm nuts to match the nuts I used on the base plate. The base plate slots on the cross slide are for 8 mm bolts but the slots on my bench drill are for much larger bolts so I had to fit repair washers to fit the cross slide base plate to the bench drill. I expect I will drill the bench drill platform to enable the centre of travel of the cross slide to sit directly under the chuck centre. It works ok and I'm happy with it.
Produktempfehlungen