Ottimo per aggiungere USB 3 a PC che non ne dispone.

Hello,Bought this expansion card to expand my USB 3.0 Ports. Installed the card, the card was recognized not so good under windows 10, tried every thing but couldn't get it to work correctly.Speed where nog good and the windows tried constant to reconnect the usb sticks or drives. So if you are looking for a card to expand your usb 3.0 i would say, just stick to the standard usb connections on your pc/laptop.Greetings,

Zwar wurde diese Produktion mit Prime 1 Tag Lieferung bestellt kam aber erst am 2 Tag an.. Sonst ist das Produkt genau das wie es beschrieben wurde..

Ha funzionato per un paio di giorni poi si è bloccata ho fatto tutte le prove possibili ma, non c'è stato modo di farla funzionare.

Sorry for the English — I'm Danish, and you don't want to read my German, I assure you ;)I bought this card at computersalg.dk, not Amazon, but it's the same card.I chose LogiLink, because in my experience, they produce cheap products, but not crappy ones. You pay a little more to get something that is made to be as cheap as possible *while still working*.And this card accomplishes that.Functionally, so far it is perfect. I'm not sure what that other reviewer's issues are, but claiming that it's "emulated USB3.0" is just wrong. The chipset is VL805, and it is used in many motherboards, which is a determining factor in why I chose to buy this card.It runs at full USB3.0 speeds on my box. Granted, I'm running Ubuntu 18.04.1, so maybe there's some issue with a Windows driver? I don't know, but I doubt it. Maybe he didn't attach the Molex connector and the board is not able to supply the 900mA of power that is required for USB3.0?The build quality is so-so. The PCB itself seems well-built, and we have a capacitor for each port. On the negative side, the metal thing at the end which is screwed into your case and that that you see from the back of the case is a little flimsy, and only held to the PCB with one screw at the bottom.Also, the Molex connector that gets power from the power supply, on my card, wasn't attached properly, meaning that it wasn't flush with the PCB. Instead, it stood out at an angle from the PCB. It still worked fine, but it seemed like something that could easily break if I were to plug/unplug the connector a lot. I ended up desoldering the connector, and instead soldering an extension cable onto the PCB, which also allows the card to fit in the slot right next to my GPU. With the original connector, plugging in a Molex connector would make it obstruct the cooler on the GPU.I'm using this card together with two 4-port hubs (also LogiLink, model UA0170, which I chose because it comes with a 3.5A power supply) to attach 10 4TB 2.5" hard drives, two connected to the card itself, the rest connected to the hubs, that are themselves connected to the remaining two ports on this card.The hard drives are running a RAIDZ-2 ZFS pool, and I've been running the system non-stop for one and a half weeks now, restoring and managing data, without a glitch.I highly recommend this card for the person who wants something cheap that actually works. Of course there are better cards out there, but for something in the cheap category, this is (so far) really good.

Kein echte Hardware USB3.0 sonder emulierte. Kann nicht zum bootable HDD benutzt werden, weil im BIOS nicht als Festplatte erkant wird. Also für vorgesehende Eisatz als USB3.0 für Bootable Festplatte nicht geeignet. Versuche zurück zu schicken. Logilink enteuscht mehr und mehr. Es ist schon zweites Gerät dieser Marke die nicht Ordnungsgemess funktioniert.