Ihr Warenkorb ist leer
Ihr Warenkorb ist leerProduktinformation
Dan
Bewertet in Großbritannien am 8. November 2023
I just need to point out that whilst the gimbals detailed in the product description will work well with this hand grip, it can also be attached to a side handle and used with any side handle that has the 1/4 and 3/8 screws as their attachment point - although you will lose the cold shoe as the handle will essentially be upside-down.I'm using this with my MOZA Air 2 and it's providing me a second grab point to the left hand side, and the screw that's supposed to be the main mount point is holding my monitor in place.The rubbery grip works well in helping you to maintain a grip even when your hands inevitably work up a sweat. There is a slight quality issue with mine, nothing major, but the rubber does not meet the edges perfectly. Worst case I can simply add some wrap material in the future.
Customer Review
Bewertet in Großbritannien am 15. November 2023
Quite often, you are holding the camera and you realise that there has to be something more comfortable to hold than the left side of an L Bracket. This simple little device holds out some hope as it will quite easily screw into the 1/4" British Standard Whitworth hole that is in pretty much all L Brackets.The physical connectivity of this hand grip is quite extensive. At one end, there is a contained screw with a knurled nut that allows you to screw it into almost anything and at the other end there are 1/4" BSW tapped holes that will allow you to screw almost anything into it.Here, I have a flash mounted on the cold-shoe at the top with the bottom screwed into a QR plate onto which the camera is mounted. In the other configuration, I have the hand grip screwed into the bottom of an L Bracket allowing you to hold that hand lower down - having to hold your hand higher than needed can become an issue over long shoots.This hand grip has good connectivity but is a little on the heavy side.
Produktempfehlungen