Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Details:
Anwendbares Modell: für MacBook Pro Retina 13 Zoll & 15 Zoll A1706 A1707 A1708 und MacBook Pro 12 Zoll A1534 2017, (nicht geeignet für A1534 2015 und 2016).
Installationshinweise:
1. Wenn Sie die alte Leerzeichenabdeckung herausnehmen, heben Sie sie vorsichtig von der oberen linken Ecke in die obere rechte Ecke (lassen Sie zuerst den oberen Knopf los), dann entfernen Sie die alte Leerzeichenabdeckung.
2. Wenn das weiße Schmetterlingsscharnier nicht beschädigt ist, richten Sie bei der Installation der Leertastenkappe zuerst auf die Schnalle am unteren Ende der Schlüsselkappe und drücken Sie dann vorsichtig das obere Ende. (Bitte nicht direkt drücken, es ist einfach, die Schlüsselkappe oder das Scharnier zu brechen).
3. Wenn das weiße Scharnier beschädigt ist, lösen Sie zuerst die linke (oder rechts) Schließe des Scharniers und ersetzen Sie dann das neue Scharnier.
Wenn Sie Schwierigkeiten haben, können Sie sich gerne mit uns in Verbindung setzen. Wir haben professionelle Ingenieure die Ihnen helfen.
Vor Versand getestet, 100 % funktionsfähig.
Lieferumfang:
1 x Schlüsselkappe und Scharnier.
Federico
Bewertet in den USA am9. März 2024
This produc is so bad!!! Broke when installing. Materials are of really poor quality. Don’t do it. Buy other one
Customer
Bewertet in den USA am22. September 2024
Like other reviewers have said. This is poor cheap quality. Literally as I go to push it down, the hook snaps.
Karen
Bewertet in den USA am9. September 2023
I own a Macbook pro 2018 and the spacebar fits perfectly. I've been waiting to adjust this spacebar for a while but the item was as described and easy to place.
Ryan
Bewertet in den USA am27. September 2022
All pieces arrived in apparently new condition, unbroken, and in working order. You can't just "snap" these things on, you have to know what you are doing, i.e. very carefully remove the underneath brackets that are glued down to the computer. VERY carefully, otherwise you can break them because of too much bending, but go slow and use both hands when taking a thin spatula of some sort and slide them under the pieces until they are free. Thankfully you really don't need to add adhesive afterwards since the adhesive remains on the objects well enough to put them back into place after removal. Once the pieces are removed (I only removed 2 out of the 3 [left and center pieces] since the 3rd [right-side] is fine where it's at if you just position the upper bracket's prongs correctly to be fitted inside the fitting area of the lower bracket) then you can put the upper bracket down (positioned correctly with topside / bottom-side as well as "flip-side" / youtube it you'll see) THEN re-attach the underneath bracket pieces that were glued down OVER the prongs on the upper bracket that was positioned after lower bracket removal. After that, you gently snap the spacebar casing onto the upper bracket (topside snaps, bottom-side is slid into first). If you have an engineering mind, this replacement is actually quite easy and will save you $400-500 for replacing the entire keyboard. Highly recommend! using a magnifying glass to assess all pieces helps to make sense of everything. The only unintuitive things about this install is the "flip-side" positioning of the upper bracket (the bracket in this purchase) and the top/bottom-side positioning. That is a bit difficult to know unless researched prior to this repair. All in all, it took me about 15-20 minutes with research to do it.
Reuben Wolsey
Bewertet in den USA am12. Februar 2022
Be very careful when taking out your old space bar because if you bust those white connectors then you’re in trouble. This kit is done,but it doesn’t come with those clips.
Produktempfehlungen
63.19€
24 .99 € 24.99€