Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

DC 12V/ 24V/ 32V 10Amp Reset-Schutzschalter Audio Automotive Inline-Sicherungshalter Schutz für Auto LKW Boot RV

Kostenloser Versand ab 25.99€

12.99€

5 .99 5.99€

Auf Lager

Info zu diesem Artikel

  • Nennstrom: 10 Ampere,Spannung: DC 12 V/24 V/32 V
  • Merkmale: Transparente Abdeckung,die innere Struktur ist deutlich sichtbar. Es handelt sich um ein wasserdichtes Produkt,das das Wasser von außen abschirmen kann.
  • Einfache Installation: Es besteht aus Metall und Kunststoff und ist langlebig für Ihr Auto. Einfache Installation. Es spart Ihnen Zeit bei der Installation.
  • Guter Ersatz: Ein guter Ersatz für das alte oder kaputte. Universell für die meisten Auto-Audiosysteme.
  • Paket enthalten: 1 x Reset-Leistungsschalter


Feature:

Made of plastic material,with good conductivity and waterproof housing. The housing can prevent water and dust.

Easy to operate by the manual reset arm,or push button reset can also be used as a kill switch.

Wide range of applications : use for car audio or video system,Boat,trucks,buses,RV's,ATV Winches.

For car audio and video system overlord protection and stop power surges from damaging your amps.

Specification:

  • Color: Black
  • Material: Metal,Plastic
  • Current Rating: 10 Amp
  • Voltage: DC 12V/ 24V/ 32V
  • Screw Thread Diameter: M6x1.0
  • Hole Diameter: 8mm / 0.31''
  • Sleeve Inner Diameter: 5mm / 0.2''
  • Installation Hole Diameter: 4mm / 0.16„
  • Size: 100x43x43mm / 3.94“x1.69"x1. 69"(L*W*H)

Note:

They Can be mounted on circuit of vehicle mounted speaker or other.

Don't need to disassemble or install insurance core while break down. You Just need switch on or off the device.

Package Included:

1 x Reset Circuit Breaker


SecureJohn
Bewertet in Großbritannien am 11. Februar 2025
This works very well. Tested on a 12v circuit. I placed a dead short on the circuit and the breaker operated instantly and without me seeing any sparks at the point of shorting.Easy to install with cable connectors having removable shrouds that screw in place. The cable connectors have hex key grub screws to hold the cables.The main body has two mounting holes on a flat flange.Operation is a lever for resetting. There is a test button to check operation / perform a disconnection.
Produktempfehlungen