Ihr Warenkorb ist leer
Ihr Warenkorb ist leerVerstellbar von 58 bis 91,4 cm Höhe, und verriegelt fest.
James B.
Bewertet in den USA am27. Dezember 2024
Well built, sturdy and stable.
Customer
Bewertet in Kanada am 17. August 2024
Works well as an off cut table for table saw. Only issue is a sheet of plywood is too large, I bought 2 so I could support both edges.
T. Wende
Bewertet in den USA am11. Mai 2024
I'm a little puzzled by the assertion that he height adjustment scratches the tape. Just turn the posts 90 degrees during assembly and the locking bolts won't contact the tape. Problem solved.Legitimate criticisms: the rollers aren't coplanar when the stand is fully extended. That's correct; every other roller is approximately 1/8" lower. This doesn't impede function in my case, but if you intend to use the rack for anything other than infeed/outfeed support, especially if you are intending to move heavy items on a conveyor line, this MAY matter.Like other reviewers, I wish that the rack could be adjusted an inch or so higher because it cannot be set high enough to be coplanar with my Bosch saw on its gravity stand. An inch of drop at a table saw's outfeed is no big deal at all, but it can matter when supporting heavy stock for crosscuts. It's a simple issue to overcome; I put some 3' long scraps of 2x6 lumber under the casters. It's quite safe because the casters Do. Not. Move. once locked.I also agree that scaling the legs' measure to final height would have been useful. In my case, it's not essential since my slab isn't level and I use the measures relative to one another and then dial in final height and level at each leg. It takes a couple of minutes.to set up, no big deal.The rack has enhanced my ability to cut large stock safely and accurately with a jobsite saw. It collapses and stays out of the way when I'm not using it. It rolls around smoothly on large casters and stays put when the casters are locked. The (inbuilt) ability to gang multiple racks together and to create 90 degree turns in a conveyor line may appeal to some, but if that's your use case, then the non-coplanar rollers at full extension may cause you to look elsewhere.Overall, I'm deducting one star from value for money because I believe the rack to be a little pricy given the limitations mentioned above. However, overall, I'm pleased enough with its sturdiness, flexibility, utility, quality of fit and finish, and footprint when collapsed to consider buying a second one.
Peter J Martucci
Bewertet in den USA am20. Juli 2023
Product works as advertised and I do like having it. However, when you want to adjust for the height, the scale on the legs doesn't make much sense.Not sure why they didn't just put a scale that equates to the actual height, but it doesn't. For example, I have mine set to an actual height of 35 3/8, yet the scale on the legs read 11 11/16. Can anyone figure that one out?Why wouldn't you just calibrate the scale to match the actual height? Something Bora may want to incorporate. Work smarter, not harder.That is the main reason for the overall 3 stars. If you are ok setting heights up the way I did using just a level and the true height you need, then this is five stars.Bearings work flawlessly and the unit is very smooth to move around.Expanding and collapsing the unit is super simple and smooth.Overall, I recommend it.
Serious Consumer
Bewertet in den USA am10. August 2023
I purchased 2 of these Bora Portamate PM-2700 Adjustable Conveyor Roller stands and they work very well. The sturdiness surprised me and the rollers easily flow with moving product along the tops.I only have one gripe and that is I wish they would have made the stand adjustments higher as they barely make the correct heights of my table saw and router table.Honestly, the legs are just too short and they need to be long enough so that you are able to reach your equipment and tightly secure the legs to metal without them falling out."An accident waiting to happen"!
Produktempfehlungen
23.87€
11 .99 € 11.99€
78.95€
33 .99 € 33.99€