Warenkorb

Ihr Warenkorb ist leer

Ihr Warenkorb ist leer

Worx WA0463 Landroid Ladestation Erweiterungsset für WR140/WR143/WR165/WR147/WR155

Kostenloser Versand ab 25.99€

256.84€

99 .00 99.00€

Auf Lager

Info zu diesem Artikel

  • [Mehr Zonen schaffen] Erstellen Sie mehrere Zonen und mähen Sie größere Flächen mit einer zusätzlichen Ladestation
  • [Pflegen Sie mehr als nur einen Bereich] Bewegen Sie Ihren Landroid in den Vor- oder Hinterhof mit der Flexibilität, 2 Ladestationen zu haben
  • Erreichen Sie einmal blockierte Bereiche: Pflegen Sie Bereiche, die einst durch eine unpassierbare Barriere oder ein komplexes Layout eingeschränkt waren
  • Echtes Landroid-Zubehör: Halten Sie Ihren Landroid gewartet und verwenden Sie immer echtes Landroid-Zubehör


Das WORX WA0463 Landroid Ladestation Erweiterungsset für die WR140/WR143/WR165/WR147/WR155 Modelle erweitert die Möglichkeiten, wo und wie viel Ihr Mähroboter mähen kann. Eine zusätzliche Ladestation und das zusätzliche 100 m Begrenzungskabel ermöglichen es Ihnen, Landroid in Bereichen zu mähen, von denen es aufgrund natürlicher Barrieren oder künstlichen Barrieren wie Landschaftsbau oder Einfahrten eingeschränkt war. Viele Landroid-Besitzer kaufen eine zweite Ladestation, damit sie eine für den Vorgarten haben können, und eine für den Hinterhof, wenn ihr Hof größer ist oder durch eine unpassierbare Grenze wie ein Zaun geteilt wird. Alles, was Sie tun müssen, ist Landroid im ausgeschalteten Zustand aufzunehmen und vorne oder hinten zu platzieren. Sicher, es ist ein bisschen extra Arbeit, aber trotzdem weit weniger als den Rasen selbst zu mähen. Zusätzliche Ladegeräte eignen sich auch hervorragend für abgelegene Bereiche Ihres Grundstücks, die vom Rest des Rasens abgeschnitten sind. Und mit 130 zusätzlichen Heringen können Sie den zusätzlichen Begrenzungsdraht nach Bedarf formen. Das Landroid Ladestation-Erweiterungsset ist ein echtes Landroid-Zubehör, das entwickelt wurde, um das volle Potenzial Ihres WORX Mähroboters auszuschöpfen. Es gibt alle möglichen zusätzlichen Funktionen, die Sie Ihrem Landroid hinzufügen können, aber stellen Sie sicher, dass Sie echte WORX Produkte verwenden, um einen optimalen Betrieb zu gewährleisten


Claus Borkowski
Bewertet in Deutschland am 7. März 2025
Dieser Artikel passt nicht zu dem 165e ! Erstmal wie es in der US Ausführung mit amerikanischen Stecker ohne Adapter geliefert. Weiterhin passen die Anschlüsse vom Ladeturm nicht ! Diese sind ca. 3 cm zu hoch.Leider habe ich das Gerät schon letztes Jahr gekauft, daher habe ich keine Ansprüche mehr.
holger schaeflein
Bewertet in Deutschland am 5. April 2025
Absoluter Witz ich habe jetzt das Teil aufgestellt! Stecker passt nicht auf deutsches Strom Netz !!!!!! Und ladestation passt nicht auf den Landroid Mäher !! Ich werde es zurückschicken
Customer
Bewertet in den USA am15. April 2025
Works well. WORX brand.
norand
Bewertet in Deutschland am 5. Mai 2024
Ich habe den Worx Landdroid WR 155E. Diese Ladestation (samt Zubehör) aus den USA passt definitiv nicht zu dem Gerät.1) Netzgerät mird mit US-Stecker geliefert2) Netzgerät ist auf US-Standard 120 V ausgerichtet. Funktioniert bei und also nicht.3) die Anschlüsse der Ladestation sind zu hoch für den Landdroid
Kunde
Bewertet in Deutschland am 17. September 2024
Das Gerät läd meinen Landroid Mäher nicht, da die Kontakte zu hoch angeordnet sind! Laut Beschreibung ist die Ladestation auch für WR165 geeignet. Zudem ist das Netzteil für den amerikanischen Markt ausgelegt, was bedeutet dass der Stecker einen Adapter benötigt und die Netzversorgung nur 120V/60Hz erfordert. Handelsübliche Geräte kommen mit beiden Netzen (120V/60Hz und 230V/50Hz)zurecht.Ich bin gespannt, was Worx bzw. Amazon dazu sagen wird.
kdirk
Bewertet in den USA am10. Juni 2024
I wanted my front yard and back yard on two separate circuits but use the same mower this was a quick cheap way to do that without buying another mower.
Kunde
Bewertet in Deutschland am 13. September 2023
Hallo, funktioniert es auch bei dem WR141E?
Brian B
Bewertet in den USA am6. August 2022
I bought this as a secondary charging station for my backyard. I wish there was an option to buy JUST the charging base. I didn’t need any additional wire or any additional stakes. I’ve seen a few other owners post about this on various social media platforms as well, so it doesn’t appear that it’s just me.My biggest complaint is that the charging base DOES NOT fully charge the 6ah battery that comes with the WR155. Instead it only charges it to approximately 4ah (about 66% capacity). I have tested and confirmed this multiple times with a battery capacity/discharge machine. I also have contacted worx Landroid support multiple times for this issue with negative results. Each time they tell me “it should charge the 6ah fully”, and that I could send it in for them to take a look at it. They are also at about a 6-8 week turnaround (according to their tech support), so maybe I’ll do this at the end of the summer season to see what they say.It does charge the 4ah battery fully, so it seems like it’s being limited by either a capacitor, or possibly software. If you’re using a larger capacity battery, do yourself a favor and buy a fast wall charger to be able to fully charge your batteries. As inconvenient as it may be, it’s the only option if you want your Landroid to run more than 90 minutes.
Bruce Mark Rathbun
Bewertet in den USA am14. Juli 2022
One of my bigger holdups on purchasing a Landroid is the issue of a privacy fence which divides the front and back yard. Having two small dogs with free doggie door access eliminates the option of leaving a gate open. My solution has been the purchase of a second charging station for the front yard. The front yard being a small portion of the 1/2 acre lot allows the robot to cut and edge the whole of the front yard in 12-15 hours. All I do is open the gate, push or lift the Landroid into the front yard and let it cut for a day once every few days. Because the second charger come with its own supply of 470' of boundary wire, the front yard serves as its own zone, so there is no confusion on the robot trying to get back to the charging station; with a second charger the yard essentially has two separate systems which are available for the robot as needed. It is also worth mention that the Landroid boundary wire cannot exceed 1,000'. In my case, the backyard has so many exclusion zones that the full 970' of supplied wire was used. So, it was necessary to have a second charging system anyway, or expend the extra cost in the magnetic avoidance system anyway.
Produktempfehlungen

19.73€

9 .99 9.99€

4.4
Option wählen

34.37€

15 .99 15.99€

4.5
Option wählen

943.89€

99 .00 99.00€

4.4
Option wählen