Ihr Warenkorb ist leer
Ihr Warenkorb ist leerbilly bumpus
Bewertet in den USA am26. Dezember 2024
Installation instructions are a JOKE! You need to enlarge an online photo to figure out it is put together! I am still trying to get the foot pump pedal installed and compressing the spring???? Been at this for 2 hours now! Totally crap!
Sir Lester
Bewertet in den USA am14. November 2024
Very happy with this jack. It also comes with extra o-rings/seals.
Customer
Bewertet in den USA am29. April 2023
Seems a bit light duty. But expected for how much cheaper of a price this is vs. brand names.
Brent Minet
Bewertet in den USA am8. April 2023
When assembling I compressed the pump spring with a wood clamp and installed the pedal. I ground the head of a 5/16 bolt slightly to fit in the 12mm bolt. I put a nut on the 5/16 bolt and used a 1/2 socket to tighten the 12mm allen head bolts. I also extended the vertical part of the valve control 10 inches .I removed a 700r4 from my 36 Ford Pu street rod with no problem. This jack is great for occasional use in a home shop and I recommend it to anyone. I would buy again.
John
Bewertet in den USA am2. September 2022
This thing is cheap, but I wanted cheap. Cheap is the best attribute.Assembly requires a 12mm hex or Allen key. Most sets end at 10mm so get one of you don’t have one. You also need outer ring clip pliers (and a spare ring clip because you’ll bend one)There are no assembly instructions other than a parts diagram on the single sheet “owners manual”. The pumping lever is difficult to install. You will need to compress the spring in a vice, zip tie it in compressed form, reinstall and the attach pumping lever.Comes with a spare set of piston o-rings… which might not be a good sign!
Produktempfehlungen