Ihr Warenkorb ist leer
Ihr Warenkorb ist leerHydraulikventil Handsteuerventil 1860100M95 1 Heblig Massey Ferguson 3-Wege-Hydraulik-Wählventil für Massey Ferguson Traktoren Dieses Ventil wird direkt auf der Liftplatte montiert (ersetzt die 180908M1 Platte) Arbeitsanschlüsse: 3/8 BSP Hebel Position 1: Externe Anwendung Nr. 1 Neutralstellung: Ölversorgung bis 3 Punkt Hebel Position 2: Externe Anwendung Nr. 2 Operating instructions of P480 USE AND OPERATION: converts MF hydraulic to external service and adds 2 ports (3/8" BSPP). Replaces MF top cover plate 180908M1 SPH330017 Fits to following models: MF 1080, 1085, 130, 135, 140, 145, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 25, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 340, 342, 35, 35x, 355, 360, 362, 365, 372,375, 383, 390, 390T, 329S, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 550, 560, 565, 590, 595, 65, 670, 675, 690, 698, 699, 85
Ludo10
Bewertet in Frankreich am 4. November 2024
J’ai mis en place ce sélecteur sur mon MF275 cette vanne me permet de choisir entre l’utilisation de mon relevage, le distributeur arrière pour ma benne et le distributeur de mon chargeur avant.Simple et rapide à mettre en place.
M
Bewertet in Spanien am 4. Februar 2024
Se supone que es una llave de paso que corta el elevador para que funcionen los implementos o viceversa
Speakerfreak
Bewertet in Deutschland am 1. Februar 2024
Hab es für meinen MF 148 bestellt.Alles top . Gut verarbeitet, leicht einzubauen.Schnelle Lieferung
francesco
Bewertet in Italien am 9. September 2022
Tutto bene
Geitlinger, Jochen
Bewertet in Deutschland am 20. Juli 2022
Ich habe diesen Umschalter verwendet, um an meinem Traktor einen Kipperanschluss zu betreiben.Die Montage gelingt mit etwas Geschick in kurzer Zeit. Das Produkt funktioniert ohne Probleme. Der Preis ist für die Qualität, Funktion und Verarbeitung sehr günstig, bezahlt man doch bei anderen Anbietern deutlich mehr.Lieferung war innerhalb von 4 Tagen da.Wer an seinem MF Traktor einen Umschalter für die Einrichtung eines Kipperanschlusses benötigt sollte hier zugreifen.
Jean-francois F.
Bewertet in Kanada am 2. Dezember 2022
That valve leaks. O-ring groove on the output is too deep so it's leaking.
j to the b
Bewertet in den USA am14. Juli 2021
There is good and bad with this product. It is well painted and the machining looks decent. It has a very solid detent and clicks nicely into all 3 position. The selector handle is also very tight with no leaks. For those reasons I kept this product and decided to fix what was wrong with it and make it usable. It really had 2 major issues that made it unusable off the jump. #1 the side of the valve had some how been impacted at the factory potentially during the chamfering process and the result was a 25 thousandths raised area on the side bottom mating surface of the valve. Basically causing it to teeter totter when sat on a flat surface. Would never have sealed like that. So I had to re-mill the bottom of the mating surface to get it perfectly flat. After that was addressed I thought I was good until I tried to install the unit and the standpipe wouldn't fit into the hole on the bottom of the valve. The hole was to small for the standpipe to fit into. This was actually the hardest thing to resolve because the hole needed to be .510 thousandths wide and it also needs to be a flat bottomed hole so a drill bit is out of the question and good luck having a square end-mill that size. I ended up using a .510 reamer which unfortunately has a slightly tapered tip and the the stand pipe needs to fit to the very bottom of the hole in the diverter valve. So for that I had to carefully file and dremill it to open up that last little bit of the hole so the standpipe would fully insert. All told I spent about 5 hours processing this piece to even be able to actually give it try and see if it even worked. Which at this point after doing all that work to it I probably couldn't have returned it if it didn't. Also the other hole with the oring barely lines up and you have to scoot the part as far to one side as the fasteners will allow to get it to seal. With all that done it works as it should. Good luck your mileage may very and you might get luckier than me. But if you get one in similar condition to mine be ready to do some machining work to get it usable. If you don't have a decently equipped workshop good luck getting right.
Produktempfehlungen
63.66€
24 .99 € 24.99€