Ihr Warenkorb ist leer
Ihr Warenkorb ist leer Ein leistungsstarker Router für jedes Projekt
Drehzahlregler bietet die richtige Geschwindigkeit für das Material, und LED-Leuchten auf der Motorbasis beleuchten den Arbeitsbereich. Seine ergonomischen Griffe und das robuste Motorgehäuse aus Druckguss machen es perfekt für die Fräsung mit 1/2-Zoll- und 1/4-Zoll-Schaft-Fräser-Bits.
Mehr über dieses Produkt:
- 10 Ampere Router mit 2,0 PS
- Drei grobe Tiefeneinstellungen mit Mikrotiefenverstellung
- Duale LED-Leuchten an der Basis des Motors.
- Drehzahlregelung 0 bis 25.000 U/min
- Softstart-Funktion
- Power-On-Sicherheitsanzeige
- Ergonomische Griffe
- Motorgehäuse aus Druckguss
- Schnellstellschrauben zur Fixierung der Kantenführung
- Eingebauter Vakuumanschluss für alternative Staubabsaugung
- Inklusive 1/5.1 cm und 1/10.2 cm Spannzangen, Spannzangenschlüssel, transparenter Unterfuß, Staubabsaugadapter und Kantenführung
Shane S.
Bewertet in den USA am23. Mai 2025
I got this router for my son-in-law. He loves it! He says that it is smooth and has plenty of power.
ian fulleylove
Bewertet in Großbritannien am 20. April 2025
Nice little machine easy to use
Jorge Elliot
Bewertet in Mexiko am 2. Mai 2024
Muy buena herramienta a un precio excelente, los acabados y el material del router son de la mejor calidad.También tengo un router Bosch, mod 1617, muy bueno también, aunque no está tan bonito como el Skil, el Bosch es para trabajo industrial, le he dado buena carga de trabajo,El Skil se calienta poquito más que el Bosch, pero también es más potente el Skil, y de mejor precio,Tengo otras herramientas Skil y me parecen de excelente calidad a un precio justo, el único detalle que no me gustó es que el cable de alimentación podría ser más largo y el orificio de la base de plástico del router,mide 1 1/4 de pulgada, lo limita para usar brocas mas anchala solución es comprar o hacerle una base con acrilico o MDF para poder usar brocas de más de 1 1/4"
Dale
Bewertet in Australien am 21. Februar 2023
High quality product but is unable to be used in Australia
Erwin
Bewertet in Kanada am 28. Juli 2022
I bought this as a dedicated router for my SKIL RAS900 Router Table.It fits the table perfectly and all of the controls for speed and height adjustment are at the front if one puts the plate on the proper way.On my first install I had all of the controls at the back and realized that was not handy. I then saw that I could turn the router 180 degrees on the plate and as such all of the controls are at the front of the router table.It is very easy to adjust the height from huge adjustments to minor or micro ones. I am able to change any bit with the router installed so that is a plus. No need to remove the router or reach under the table as the bit can be installed or removed with the included wrench at the top of the router table.When I first turned on the router in the house with no bit attached I did a speed test and one could hear the huge difference from the 1 to the max 6 adjustment on the speed dial.For those interested in how much voltage this router uses, my tests showed it used 105 volts on the lowest speed and 535 volts on the highest speed. Now that was tested with no bit attached. Now with a bit cutting into wood creating a workload one would think that all of my voltage numbers would be a bit higher.It comes with an edge guide and all of those cheap ones are next to useless, unless one just wants to cut a dado straight down the board with no concern of an exact measurement in distance from the edge.The included 1/4 inch collet that plugs into the 1/2 inch collet is solid and a perfect fit for 1/4 inch shank bits.For the price this looks to be a really good router and will handle most tasks that one will ever do with a router table.
Produktempfehlungen
31.99€
14 .99 € 14.99€