john
Bewertet in den USA am8. Dezember 2024
I have been using these for several years. They are very durable and help distribute the load of the jack effectively. With most uni-body automobiles having a seam running between the wheel wheels, corrosion can attack and weaken the steel in the area of the jacking point. Before utilizing these "pucks" to distribute the load, the steel lifting point of the jack would deform the seam and surrounding under-body. These pucks seem to resolve that issue and hence they do exactly what I was hoping for.
Thomas B.
Bewertet in den USA am7. August 2024
So far, this pad has proven to be up to the task. The pad is very thick, durable and provides added protection to stop metal-to-metal contact. The pad’s width is just a hair too wide for my hydraulic jack, but nothing that you cannot manage. I do like the two types of cross slot design and the excellent price point. Since this pad has yet to be put to the test over any length of time, I am giving it four stars for now and will update the review if warranted. But for now, quite happy with the jack pad.
clyde714
Bewertet in den USA am31. Dezember 2024
I just used this to jack up my car so I could paint the calipers. It performed well - minimal flexing, no slippage, and no damage at all to the pinch weld. One thing to note about it - it has a 3.9" diameter, so check the diameter of the foot of the jack you plan to use to make sure it will fit properly. Many 3ton jacks have a 3.75" diameter foot, so this puck is slightly too big. You can still use it, but just be aware it won't fit snugly on the foot.
Daniel
Bewertet in Deutschland am 17. November 2024
Sehr durchdachtes System mit den 2 unterschiedlichen Tiefen der Ausnehmungen. Passt perfekt auf gängige "große Wagenheber".
Michael Wentzel
Bewertet in Deutschland am 15. Juni 2024
Alles gut 👍🏼
Richard M
Bewertet in den USA am22. April 2024
Two features: One, it straddles the weldment on a Chrysler 200 at the front lift sides of the car, so the sheet metal is not damaged when using a floor jack. Second, I was able to replace the thin rubberized insert in my floor jack using this part as an insert. Since the lifting plate swivels there is no need for this jack pad to have to rotate on the lift plate. It made a snug tight fitting assembly. With careful use of a putty knife and tapping in place with a rubber mallet I am sure it will stay in place for years to come.
Norbert Vogt
Bewertet in Deutschland am 28. Oktober 2023
Habe gerade die Winterreifen ans Auto geschraubt und dabei diesen Gummiträger benutzt. Was soll ich sagen, das Ding trägt sogar problemlos meinen SUV. Kann ich nur empfehlen. 5 Sternchen und noch 1 Sternchen extra für die schnelle Lieferung.
Armando Chapa
Bewertet in Mexiko am 23. Dezember 2023
Cumple muy bien con su función y es de buen material.